UNIPUMP AUTO JET S
Eng | Ru

UNIPUMP AUTO JET S

UNIPUMP AUTO JET S

AUTO JET S automatic water supply stations based on JET S centrifugal surface pump with extended built-in ejector and 5, 24 (or 20) or 50L pressure tank are used to supply clean water from boreholes, wells and other water sources and maintain water pressure in water supply system in automatic mode.

Water must not contain particles with linear dimension greater than 1mm; total amount of mechanical admixtures: not more than 100 g/m; range of water operating temperatures: + 1°C to + 35°C.

Technical information

Parameters / ModelAUTO JET 60 SAUTO JET 80 SAUTO JET 100 S
System parameter~220V, 50Hz
Capacity max, l/min505656
Electric motor power, W450600750
Head max, m333843
Entry hole and pressure port1" х 1"
Max suction head, m8
Cut-in pressure, MPa0,15
Cut-off pressure, MPa0,30
Pump body materialcast iron
Impeller materialbrass

Head and rate specification

Model Р, (kW) Capacity
Q, l/min 0 10 20 30 40 50 60 70
Q, m3/h 0 0,6 1,2 1,8 2,4 3,0 3,6 4,2
AUTO JET 60 S 0.45 Head,
Н(m)
36 29 20 11 - - - -
AUTO JET 80 S 0.6 38 32 25 18 10 2 - -
AUTO JET 100 S 0.75 43 38 32 25 18 10 2 -

* The data given above relating to maximum head and capacity is true when suction depth is zero and system voltage is 220V ± 10%.



Trademark: UNIPUMP
Manufacturer: UNIPUMP
Warranty:  24 months


All section equipment: UNIPUMP AUTO


← Back to section