UNIPUMP AUPS 126
AUPS 126 automatic water supply stations with 2L pressure tank is designed for pressure boosting in automatic mode in case of insufficient pressure in centralized water supply systems.
The station can be also used to supply clean water from boreholes, wells and other water supply sources.
Water must not contain particles with linear dimension greater than 0.1mm; total amount of mechanical admixtures: not more than 100 g/m; range of water operating temperatures: +1 - +35°C.
|Parameters / Model||AUPS 126|
|Pump body material||cast iron|
|System parameters||~220V, 50Hz|
|Electric motor power, W||370|
|Capacity max, l/min||30|
|Head max, m||33|
|Entry hole and pressure port diameter||1" х 1"|
|Max suction head, m||5|
|Cut-in pressure, MPa||0,15|
|Cut-off pressure, MPa||0,22|
Head and rate specification
* The data given above relating to maximum head and capacity is true when suction depth is zero and system voltage is 220V ± 10%.
Warranty: 24 months
All section equipment: UNIPUMP AUTO
← Back to section